WaterSam® A competitively priced, self-emptying and self-cleaning sampler for basic but constant monitoring of discharges.
This sampler is ideal for 24 hour composite sampling, the previous day’s sample being retained for 24 hours before being automatically emptied if not collected.
MicroSam. The control unit for time, volume or event proportional sampling.
The bottles will be automatically rinsed after every bottle change
WatchSam Integral monitor protects the equipment, controls cooling/heating and pump.
FraktioSam, the motordriven direct distributor alternates between the two sample collection bottles (2 x 10L) at predetermined intervals.
Should the sample not be required for further analysis, the bottle will automatically be emptied and washed
ThermoSam, the refrigerated cabinets are fully protected from the elements by a stainless steel casing. A 40mm insulation ensures that the samples are quickly cooled and maintained in optimal storage conditions, winter or summer.
Electrical and mechanical components are positioned safely in the dry conditions above the wet system elements.
ServiSam Our samplers are designed for ease of service. Our service personnel will take care of any problem that falls outside your own day to day care regime.
rinsing with fresh water, 3-6 bar, valves for water, pressure regulator with filter, sprayheads
Sample shots
20 – 350 ml
Sample inlet
12mm dia. PVC hose
Suction height
7.5 m with standard small pump optional 8 m with large pump
Distributor
X-direct distributor
Distributor hose
15 mm dia. silicone
Pump
Piston with valves for vacuum and pressure, up to 8 m lift 230 V AC; 19l/min; -085 to 7 bar
Housing
Type 304 stainless steel (V2A)
Refrigeration unit
Compressor cooling with automatic defrost
Heating
350 W, anti-frost heater PT 100 temperature sensor
Control unit
Microprocessor controlled, 4 button tactile back lighted keypad with 4 x 20col.LCD display, real time clock, 5 year RAM battery back-up, overload protected outputs
Software
Menu driven, 9 programmes to be run simultaneously, memory for errors, events and operation status Preset and free distributor settings Combination and interlinking programmes as standard feature
Flow signals
Analogue: 0/4 – 20 mA Digital: potential-free contacts
Event signals
Potential-free contact
Interface
RS 232 or RS 485
Remote control
GSM modem (optional) GSM/GPRS modem (optional)
Electrical data
230 V / 50 Hz / 16A / 400 VA max
Dimensions
H 1610 mm; W 655 (720) mm; D 770 mm; approx. 112 kg
We reserve the right to make technical changes without notice. Error and omission expected.
