Monitoring Stations

Home::Monitoring Stations
Monitoring Stations 2017-07-21T13:21:52+00:00

Samplers with External or Built-In Water Monitoring

Monitoring Stations

Sampling and Water Quality Monitoring

Any WaterSam sampler can be upgraded to a monitoring station by connecting water quality monitoring instruments. A range of sensors and parameters are available to choose from, and measured values can be stored in the controller and easily retrieved.

Sensors can be positioned directly in the sample medium source, or installed in a monitoring vessel inside the sampler. Installation in a sampler offers the benefits of protection as well as easy access for cleaning and calibration.

The sampler can be set to take samples in case upper and/or lower parameter limits are exceeded.

If the sampler is equipped with an XY Distributor or an additional sampling system, event-based samples can be deposited in containers specially reserved for such a case.

  • Monitoring equipment directly from WaterSam or according to customer request
  • Intelligent sensors do not require an expensive transmitter
  • Measured data can be logged
  • Connection to existing monitoring equipment is possible
Messstation - Monitoring station WS 316 MS

Standard Sampler
with one or more external sensors

Messstation mit externem Sensor - Monitoring station with external sensor WS 316 MS

WS 316 MS Monitoring Station
with built-in sensor

Messstation mit eingebautem Sensor - Monitoring station with installed sensor WS 316 MS

WS 316 GMS Large Monitoring Station
with multiple built-in sensors

Große Messstation - Large monitoring station WS 316 GMS
Combinations:
WS Porti
WS 98
WS 312
WS 316
WS 316 SR
WS 316 SE
Standard Samplers
Upgraded with one or more external sensors
X
X
X
X
X
X
WS 316 MS
Monitoring station with built-in monitoring glass for a sensor
-
-
-
X
X
-
WS 316 GMS
Large monitoring station with built-in monitoring vessel for multiple sensors
-
-
-
X
X
X
X   This sampler can be selected as the basis of a monitoring station
–   This sampler cannot be selected as the basis of a monitoring station
WS 361 GMS

WS 316 GMS Large Monitoring Station

The Monitoring Station with Multiple Sensors in a Built-In Monitoring Vessel

The double-cabinet large monitoring station consists of a sampler and a monitoring cabinet. Either a regular WS 316 or a WS 316 SE may be selected as the sampler portion. The monitoring cabinet contains a monitoring vessel with constant flow to continuously provide fresh sample media. This ensures accurately measured values, and the sensors are easily accessible for cleaning and calibration.

Downloads